Quick view Details Mikuni | sku: VMC_ZN8650-CB302-140 40" Throttle Cable Mikuni End MSRP: Now: $14.95 Add to Cart Compare Quick view Details Mikuni | sku: NR_MAN-LG-PULSE Intake Manifold Mikuni 22MM GX200 Predator 212 Long Style with Pulse MSRP: Now: $51.99 Add to Cart Compare SPECIAL ORDER Quick view Details Predator | sku: NR_QMNRR-12 Intake Manifold GX390 Carb to GX200 Predator 212 Long Style MSRP: $48.38 Now: $42.99 Add to Cart Compare Quick view Details Mikuni | sku: NR_28MM-MIKUNI-ALKY-CARB Mikuni 28MM Flatslide Carb, Methanol MSRP: Now: $159.99 View Details Compare Quick view Details Mikuni | sku: K_OMBMCB Mikuni Throttle Bracket Predator 212 Ghost GX200 Clone MSRP: $19.99 Now: $19.95 Add to Cart Compare Quick view Details Mikuni | sku: TI_472INT Intake Manifold 28mm Slide/Spigot to 196cc Clone Honda GX200 Predator 212 MSRP: Now: $41.99 View Details Compare Quick view Details sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 MSRP: Now: $10.99 View Details Compare Quick view Details Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour MSRP: Now: $35.99 View Details Compare SPECIAL ORDER Quick view Details sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable MSRP: Now: $17.99 Add to Cart Compare Quick view Details Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor MSRP: Now: $127.99 View Details Compare Quick view Details Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) MSRP: Now: $104.10 View Details Compare Quick view Details sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 MSRP: Now: $41.99 Add to Cart Compare Quick view Mikuni | sku: VMC_ZN8650-CB302-140 40" Throttle Cable Mikuni End 40" total length cable with barrel and slide carb ends MSRP: Now: $14.95 Add to Cart Compare Quick view Mikuni | sku: NR_MAN-LG-PULSE Intake Manifold Mikuni 22MM GX200 Predator 212 Long Style with Pulse Intake Manifold, Mikuni 22mm carbs to GX200/Predator 212, 196cc Clone/Tillotson 212. Also adapts GX390 and most flanged carbs. With pulse fitting to run fuel pumps. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $51.99 Add to Cart Compare Quick view Predator | sku: NR_QMNRR-12 Intake Manifold GX390 Carb to GX200 Predator 212 Long Style Intake Manifold, GX390 Carb to GX200/196cc Clone, Predator 212/Tillotson 212. Does not require insulator plate. Includes Pulse fitting for Fuel pump. Typically requires a 100 Main Jet for std bore Gas GX390 carbs and 102 or 105 for Gas Bored Carbs... MSRP: $48.38 Now: $42.99 Add to Cart Compare Quick view Mikuni | sku: NR_28MM-MIKUNI-ALKY-CARB Mikuni 28MM Flatslide Carb, Methanol Genuine Mikuni 28MM Flatslide carburetor prepared for use with methanol/alcohol This is the carb only. MSRP: Now: $159.99 View Details Compare Quick view Mikuni | sku: K_OMBMCB Mikuni Throttle Bracket Predator 212 Ghost GX200 Clone Finally, there is a way to use a vintage throttle and a Mikuni carb! This bracket bolts to the side cover of most 6.5HP OHV engines, such as the Predator 212, GX200, and Clones. Perfect for minibikes and go karts. Once bolted to the side cover you can... MSRP: $19.99 Now: $19.95 Add to Cart Compare Quick view Mikuni | sku: TI_472INT Intake Manifold 28mm Slide/Spigot to 196cc Clone Honda GX200 Predator 212 Intake Manifold 28mm Slide/Spigot to 196cc Clone, Honda GX200, Predator 212 engines Designed and CNC machined to match each unique intake port shape precisely at the entrance of the block or cylinder head. The resulting action is no turbulence causing... MSRP: Now: $41.99 View Details Compare Quick view sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 Cone Air Filter, Race, 3" x 2.25" Inside diameter is 39mmStainless Steel CapFits 22mm Small Body Mikuni carbs. Color may vary. Carb not included Like all guaze type filters, this filter needs to be oiled for maximum filtration! MSRP: Now: $10.99 View Details Compare Quick view Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour Mikuni DF52 Pulse Style Fuel Pump. This fuel pump operates from a vacuum pulse from either the engine's crankcase or intake manifold. Methanol or Gas. 35 lt/hr Single or Dual outlet Use for high volume small and big block methanol applications MSRP: Now: $35.99 View Details Compare Quick view sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable Throttle Cable for Mikuni Carbs, With Sleeve, 39" Sleeve Length: 39 inchesOverall Length: 44 inches90° Angle Mount Has Curved end with Barrel for attaching to twist Throttles MSRP: Now: $17.99 Add to Cart Compare Quick view Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor Mikuni TM 24mm Flat Slide Carburetor. Special order only. May take up to 10 days to ship. MSRP: Now: $127.99 View Details Compare Quick view Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) This is a genuine VM22 Mikuni Carb, not a Chinese copy. This is a flange mount carb. MSRP: Now: $104.10 View Details Compare Quick view sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200 and Predator 212. The tube end has a 1.25" OD and 1.135" ID for use with many tube mount carbs. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $41.99 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details Mikuni | sku: NR_MAN-LG-PULSE Intake Manifold Mikuni 22MM GX200 Predator 212 Long Style with Pulse MSRP: Now: $51.99 Add to Cart Compare SPECIAL ORDER Quick view Details Predator | sku: NR_QMNRR-12 Intake Manifold GX390 Carb to GX200 Predator 212 Long Style MSRP: $48.38 Now: $42.99 Add to Cart Compare Quick view Details Mikuni | sku: NR_28MM-MIKUNI-ALKY-CARB Mikuni 28MM Flatslide Carb, Methanol MSRP: Now: $159.99 View Details Compare Quick view Details Mikuni | sku: K_OMBMCB Mikuni Throttle Bracket Predator 212 Ghost GX200 Clone MSRP: $19.99 Now: $19.95 Add to Cart Compare Quick view Details Mikuni | sku: TI_472INT Intake Manifold 28mm Slide/Spigot to 196cc Clone Honda GX200 Predator 212 MSRP: Now: $41.99 View Details Compare Quick view Details sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 MSRP: Now: $10.99 View Details Compare Quick view Details Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour MSRP: Now: $35.99 View Details Compare SPECIAL ORDER Quick view Details sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable MSRP: Now: $17.99 Add to Cart Compare Quick view Details Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor MSRP: Now: $127.99 View Details Compare Quick view Details Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) MSRP: Now: $104.10 View Details Compare Quick view Details sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 MSRP: Now: $41.99 Add to Cart Compare Quick view Mikuni | sku: VMC_ZN8650-CB302-140 40" Throttle Cable Mikuni End 40" total length cable with barrel and slide carb ends MSRP: Now: $14.95 Add to Cart Compare Quick view Mikuni | sku: NR_MAN-LG-PULSE Intake Manifold Mikuni 22MM GX200 Predator 212 Long Style with Pulse Intake Manifold, Mikuni 22mm carbs to GX200/Predator 212, 196cc Clone/Tillotson 212. Also adapts GX390 and most flanged carbs. With pulse fitting to run fuel pumps. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $51.99 Add to Cart Compare Quick view Predator | sku: NR_QMNRR-12 Intake Manifold GX390 Carb to GX200 Predator 212 Long Style Intake Manifold, GX390 Carb to GX200/196cc Clone, Predator 212/Tillotson 212. Does not require insulator plate. Includes Pulse fitting for Fuel pump. Typically requires a 100 Main Jet for std bore Gas GX390 carbs and 102 or 105 for Gas Bored Carbs... MSRP: $48.38 Now: $42.99 Add to Cart Compare Quick view Mikuni | sku: NR_28MM-MIKUNI-ALKY-CARB Mikuni 28MM Flatslide Carb, Methanol Genuine Mikuni 28MM Flatslide carburetor prepared for use with methanol/alcohol This is the carb only. MSRP: Now: $159.99 View Details Compare Quick view Mikuni | sku: K_OMBMCB Mikuni Throttle Bracket Predator 212 Ghost GX200 Clone Finally, there is a way to use a vintage throttle and a Mikuni carb! This bracket bolts to the side cover of most 6.5HP OHV engines, such as the Predator 212, GX200, and Clones. Perfect for minibikes and go karts. Once bolted to the side cover you can... MSRP: $19.99 Now: $19.95 Add to Cart Compare Quick view Mikuni | sku: TI_472INT Intake Manifold 28mm Slide/Spigot to 196cc Clone Honda GX200 Predator 212 Intake Manifold 28mm Slide/Spigot to 196cc Clone, Honda GX200, Predator 212 engines Designed and CNC machined to match each unique intake port shape precisely at the entrance of the block or cylinder head. The resulting action is no turbulence causing... MSRP: Now: $41.99 View Details Compare Quick view sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 Cone Air Filter, Race, 3" x 2.25" Inside diameter is 39mmStainless Steel CapFits 22mm Small Body Mikuni carbs. Color may vary. Carb not included Like all guaze type filters, this filter needs to be oiled for maximum filtration! MSRP: Now: $10.99 View Details Compare Quick view Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour Mikuni DF52 Pulse Style Fuel Pump. This fuel pump operates from a vacuum pulse from either the engine's crankcase or intake manifold. Methanol or Gas. 35 lt/hr Single or Dual outlet Use for high volume small and big block methanol applications MSRP: Now: $35.99 View Details Compare Quick view sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable Throttle Cable for Mikuni Carbs, With Sleeve, 39" Sleeve Length: 39 inchesOverall Length: 44 inches90° Angle Mount Has Curved end with Barrel for attaching to twist Throttles MSRP: Now: $17.99 Add to Cart Compare Quick view Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor Mikuni TM 24mm Flat Slide Carburetor. Special order only. May take up to 10 days to ship. MSRP: Now: $127.99 View Details Compare Quick view Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) This is a genuine VM22 Mikuni Carb, not a Chinese copy. This is a flange mount carb. MSRP: Now: $104.10 View Details Compare Quick view sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200 and Predator 212. The tube end has a 1.25" OD and 1.135" ID for use with many tube mount carbs. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $41.99 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
SPECIAL ORDER Quick view Details Predator | sku: NR_QMNRR-12 Intake Manifold GX390 Carb to GX200 Predator 212 Long Style MSRP: $48.38 Now: $42.99 Add to Cart Compare Quick view Details Mikuni | sku: NR_28MM-MIKUNI-ALKY-CARB Mikuni 28MM Flatslide Carb, Methanol MSRP: Now: $159.99 View Details Compare Quick view Details Mikuni | sku: K_OMBMCB Mikuni Throttle Bracket Predator 212 Ghost GX200 Clone MSRP: $19.99 Now: $19.95 Add to Cart Compare Quick view Details Mikuni | sku: TI_472INT Intake Manifold 28mm Slide/Spigot to 196cc Clone Honda GX200 Predator 212 MSRP: Now: $41.99 View Details Compare Quick view Details sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 MSRP: Now: $10.99 View Details Compare Quick view Details Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour MSRP: Now: $35.99 View Details Compare SPECIAL ORDER Quick view Details sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable MSRP: Now: $17.99 Add to Cart Compare Quick view Details Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor MSRP: Now: $127.99 View Details Compare Quick view Details Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) MSRP: Now: $104.10 View Details Compare Quick view Details sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 MSRP: Now: $41.99 Add to Cart Compare Quick view Mikuni | sku: VMC_ZN8650-CB302-140 40" Throttle Cable Mikuni End 40" total length cable with barrel and slide carb ends MSRP: Now: $14.95 Add to Cart Compare Quick view Mikuni | sku: NR_MAN-LG-PULSE Intake Manifold Mikuni 22MM GX200 Predator 212 Long Style with Pulse Intake Manifold, Mikuni 22mm carbs to GX200/Predator 212, 196cc Clone/Tillotson 212. Also adapts GX390 and most flanged carbs. With pulse fitting to run fuel pumps. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $51.99 Add to Cart Compare Quick view Predator | sku: NR_QMNRR-12 Intake Manifold GX390 Carb to GX200 Predator 212 Long Style Intake Manifold, GX390 Carb to GX200/196cc Clone, Predator 212/Tillotson 212. Does not require insulator plate. Includes Pulse fitting for Fuel pump. Typically requires a 100 Main Jet for std bore Gas GX390 carbs and 102 or 105 for Gas Bored Carbs... MSRP: $48.38 Now: $42.99 Add to Cart Compare Quick view Mikuni | sku: NR_28MM-MIKUNI-ALKY-CARB Mikuni 28MM Flatslide Carb, Methanol Genuine Mikuni 28MM Flatslide carburetor prepared for use with methanol/alcohol This is the carb only. MSRP: Now: $159.99 View Details Compare Quick view Mikuni | sku: K_OMBMCB Mikuni Throttle Bracket Predator 212 Ghost GX200 Clone Finally, there is a way to use a vintage throttle and a Mikuni carb! This bracket bolts to the side cover of most 6.5HP OHV engines, such as the Predator 212, GX200, and Clones. Perfect for minibikes and go karts. Once bolted to the side cover you can... MSRP: $19.99 Now: $19.95 Add to Cart Compare Quick view Mikuni | sku: TI_472INT Intake Manifold 28mm Slide/Spigot to 196cc Clone Honda GX200 Predator 212 Intake Manifold 28mm Slide/Spigot to 196cc Clone, Honda GX200, Predator 212 engines Designed and CNC machined to match each unique intake port shape precisely at the entrance of the block or cylinder head. The resulting action is no turbulence causing... MSRP: Now: $41.99 View Details Compare Quick view sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 Cone Air Filter, Race, 3" x 2.25" Inside diameter is 39mmStainless Steel CapFits 22mm Small Body Mikuni carbs. Color may vary. Carb not included Like all guaze type filters, this filter needs to be oiled for maximum filtration! MSRP: Now: $10.99 View Details Compare Quick view Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour Mikuni DF52 Pulse Style Fuel Pump. This fuel pump operates from a vacuum pulse from either the engine's crankcase or intake manifold. Methanol or Gas. 35 lt/hr Single or Dual outlet Use for high volume small and big block methanol applications MSRP: Now: $35.99 View Details Compare Quick view sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable Throttle Cable for Mikuni Carbs, With Sleeve, 39" Sleeve Length: 39 inchesOverall Length: 44 inches90° Angle Mount Has Curved end with Barrel for attaching to twist Throttles MSRP: Now: $17.99 Add to Cart Compare Quick view Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor Mikuni TM 24mm Flat Slide Carburetor. Special order only. May take up to 10 days to ship. MSRP: Now: $127.99 View Details Compare Quick view Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) This is a genuine VM22 Mikuni Carb, not a Chinese copy. This is a flange mount carb. MSRP: Now: $104.10 View Details Compare Quick view sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200 and Predator 212. The tube end has a 1.25" OD and 1.135" ID for use with many tube mount carbs. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $41.99 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details Mikuni | sku: NR_28MM-MIKUNI-ALKY-CARB Mikuni 28MM Flatslide Carb, Methanol MSRP: Now: $159.99 View Details Compare Quick view Details Mikuni | sku: K_OMBMCB Mikuni Throttle Bracket Predator 212 Ghost GX200 Clone MSRP: $19.99 Now: $19.95 Add to Cart Compare Quick view Details Mikuni | sku: TI_472INT Intake Manifold 28mm Slide/Spigot to 196cc Clone Honda GX200 Predator 212 MSRP: Now: $41.99 View Details Compare Quick view Details sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 MSRP: Now: $10.99 View Details Compare Quick view Details Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour MSRP: Now: $35.99 View Details Compare SPECIAL ORDER Quick view Details sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable MSRP: Now: $17.99 Add to Cart Compare Quick view Details Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor MSRP: Now: $127.99 View Details Compare Quick view Details Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) MSRP: Now: $104.10 View Details Compare Quick view Details sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 MSRP: Now: $41.99 Add to Cart Compare Quick view Mikuni | sku: VMC_ZN8650-CB302-140 40" Throttle Cable Mikuni End 40" total length cable with barrel and slide carb ends MSRP: Now: $14.95 Add to Cart Compare Quick view Mikuni | sku: NR_MAN-LG-PULSE Intake Manifold Mikuni 22MM GX200 Predator 212 Long Style with Pulse Intake Manifold, Mikuni 22mm carbs to GX200/Predator 212, 196cc Clone/Tillotson 212. Also adapts GX390 and most flanged carbs. With pulse fitting to run fuel pumps. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $51.99 Add to Cart Compare Quick view Predator | sku: NR_QMNRR-12 Intake Manifold GX390 Carb to GX200 Predator 212 Long Style Intake Manifold, GX390 Carb to GX200/196cc Clone, Predator 212/Tillotson 212. Does not require insulator plate. Includes Pulse fitting for Fuel pump. Typically requires a 100 Main Jet for std bore Gas GX390 carbs and 102 or 105 for Gas Bored Carbs... MSRP: $48.38 Now: $42.99 Add to Cart Compare Quick view Mikuni | sku: NR_28MM-MIKUNI-ALKY-CARB Mikuni 28MM Flatslide Carb, Methanol Genuine Mikuni 28MM Flatslide carburetor prepared for use with methanol/alcohol This is the carb only. MSRP: Now: $159.99 View Details Compare Quick view Mikuni | sku: K_OMBMCB Mikuni Throttle Bracket Predator 212 Ghost GX200 Clone Finally, there is a way to use a vintage throttle and a Mikuni carb! This bracket bolts to the side cover of most 6.5HP OHV engines, such as the Predator 212, GX200, and Clones. Perfect for minibikes and go karts. Once bolted to the side cover you can... MSRP: $19.99 Now: $19.95 Add to Cart Compare Quick view Mikuni | sku: TI_472INT Intake Manifold 28mm Slide/Spigot to 196cc Clone Honda GX200 Predator 212 Intake Manifold 28mm Slide/Spigot to 196cc Clone, Honda GX200, Predator 212 engines Designed and CNC machined to match each unique intake port shape precisely at the entrance of the block or cylinder head. The resulting action is no turbulence causing... MSRP: Now: $41.99 View Details Compare Quick view sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 Cone Air Filter, Race, 3" x 2.25" Inside diameter is 39mmStainless Steel CapFits 22mm Small Body Mikuni carbs. Color may vary. Carb not included Like all guaze type filters, this filter needs to be oiled for maximum filtration! MSRP: Now: $10.99 View Details Compare Quick view Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour Mikuni DF52 Pulse Style Fuel Pump. This fuel pump operates from a vacuum pulse from either the engine's crankcase or intake manifold. Methanol or Gas. 35 lt/hr Single or Dual outlet Use for high volume small and big block methanol applications MSRP: Now: $35.99 View Details Compare Quick view sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable Throttle Cable for Mikuni Carbs, With Sleeve, 39" Sleeve Length: 39 inchesOverall Length: 44 inches90° Angle Mount Has Curved end with Barrel for attaching to twist Throttles MSRP: Now: $17.99 Add to Cart Compare Quick view Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor Mikuni TM 24mm Flat Slide Carburetor. Special order only. May take up to 10 days to ship. MSRP: Now: $127.99 View Details Compare Quick view Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) This is a genuine VM22 Mikuni Carb, not a Chinese copy. This is a flange mount carb. MSRP: Now: $104.10 View Details Compare Quick view sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200 and Predator 212. The tube end has a 1.25" OD and 1.135" ID for use with many tube mount carbs. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $41.99 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details Mikuni | sku: K_OMBMCB Mikuni Throttle Bracket Predator 212 Ghost GX200 Clone MSRP: $19.99 Now: $19.95 Add to Cart Compare Quick view Details Mikuni | sku: TI_472INT Intake Manifold 28mm Slide/Spigot to 196cc Clone Honda GX200 Predator 212 MSRP: Now: $41.99 View Details Compare Quick view Details sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 MSRP: Now: $10.99 View Details Compare Quick view Details Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour MSRP: Now: $35.99 View Details Compare SPECIAL ORDER Quick view Details sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable MSRP: Now: $17.99 Add to Cart Compare Quick view Details Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor MSRP: Now: $127.99 View Details Compare Quick view Details Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) MSRP: Now: $104.10 View Details Compare Quick view Details sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 MSRP: Now: $41.99 Add to Cart Compare Quick view Mikuni | sku: VMC_ZN8650-CB302-140 40" Throttle Cable Mikuni End 40" total length cable with barrel and slide carb ends MSRP: Now: $14.95 Add to Cart Compare Quick view Mikuni | sku: NR_MAN-LG-PULSE Intake Manifold Mikuni 22MM GX200 Predator 212 Long Style with Pulse Intake Manifold, Mikuni 22mm carbs to GX200/Predator 212, 196cc Clone/Tillotson 212. Also adapts GX390 and most flanged carbs. With pulse fitting to run fuel pumps. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $51.99 Add to Cart Compare Quick view Predator | sku: NR_QMNRR-12 Intake Manifold GX390 Carb to GX200 Predator 212 Long Style Intake Manifold, GX390 Carb to GX200/196cc Clone, Predator 212/Tillotson 212. Does not require insulator plate. Includes Pulse fitting for Fuel pump. Typically requires a 100 Main Jet for std bore Gas GX390 carbs and 102 or 105 for Gas Bored Carbs... MSRP: $48.38 Now: $42.99 Add to Cart Compare Quick view Mikuni | sku: NR_28MM-MIKUNI-ALKY-CARB Mikuni 28MM Flatslide Carb, Methanol Genuine Mikuni 28MM Flatslide carburetor prepared for use with methanol/alcohol This is the carb only. MSRP: Now: $159.99 View Details Compare Quick view Mikuni | sku: K_OMBMCB Mikuni Throttle Bracket Predator 212 Ghost GX200 Clone Finally, there is a way to use a vintage throttle and a Mikuni carb! This bracket bolts to the side cover of most 6.5HP OHV engines, such as the Predator 212, GX200, and Clones. Perfect for minibikes and go karts. Once bolted to the side cover you can... MSRP: $19.99 Now: $19.95 Add to Cart Compare Quick view Mikuni | sku: TI_472INT Intake Manifold 28mm Slide/Spigot to 196cc Clone Honda GX200 Predator 212 Intake Manifold 28mm Slide/Spigot to 196cc Clone, Honda GX200, Predator 212 engines Designed and CNC machined to match each unique intake port shape precisely at the entrance of the block or cylinder head. The resulting action is no turbulence causing... MSRP: Now: $41.99 View Details Compare Quick view sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 Cone Air Filter, Race, 3" x 2.25" Inside diameter is 39mmStainless Steel CapFits 22mm Small Body Mikuni carbs. Color may vary. Carb not included Like all guaze type filters, this filter needs to be oiled for maximum filtration! MSRP: Now: $10.99 View Details Compare Quick view Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour Mikuni DF52 Pulse Style Fuel Pump. This fuel pump operates from a vacuum pulse from either the engine's crankcase or intake manifold. Methanol or Gas. 35 lt/hr Single or Dual outlet Use for high volume small and big block methanol applications MSRP: Now: $35.99 View Details Compare Quick view sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable Throttle Cable for Mikuni Carbs, With Sleeve, 39" Sleeve Length: 39 inchesOverall Length: 44 inches90° Angle Mount Has Curved end with Barrel for attaching to twist Throttles MSRP: Now: $17.99 Add to Cart Compare Quick view Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor Mikuni TM 24mm Flat Slide Carburetor. Special order only. May take up to 10 days to ship. MSRP: Now: $127.99 View Details Compare Quick view Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) This is a genuine VM22 Mikuni Carb, not a Chinese copy. This is a flange mount carb. MSRP: Now: $104.10 View Details Compare Quick view sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200 and Predator 212. The tube end has a 1.25" OD and 1.135" ID for use with many tube mount carbs. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $41.99 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details Mikuni | sku: TI_472INT Intake Manifold 28mm Slide/Spigot to 196cc Clone Honda GX200 Predator 212 MSRP: Now: $41.99 View Details Compare Quick view Details sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 MSRP: Now: $10.99 View Details Compare Quick view Details Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour MSRP: Now: $35.99 View Details Compare SPECIAL ORDER Quick view Details sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable MSRP: Now: $17.99 Add to Cart Compare Quick view Details Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor MSRP: Now: $127.99 View Details Compare Quick view Details Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) MSRP: Now: $104.10 View Details Compare Quick view Details sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 MSRP: Now: $41.99 Add to Cart Compare Quick view Mikuni | sku: VMC_ZN8650-CB302-140 40" Throttle Cable Mikuni End 40" total length cable with barrel and slide carb ends MSRP: Now: $14.95 Add to Cart Compare Quick view Mikuni | sku: NR_MAN-LG-PULSE Intake Manifold Mikuni 22MM GX200 Predator 212 Long Style with Pulse Intake Manifold, Mikuni 22mm carbs to GX200/Predator 212, 196cc Clone/Tillotson 212. Also adapts GX390 and most flanged carbs. With pulse fitting to run fuel pumps. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $51.99 Add to Cart Compare Quick view Predator | sku: NR_QMNRR-12 Intake Manifold GX390 Carb to GX200 Predator 212 Long Style Intake Manifold, GX390 Carb to GX200/196cc Clone, Predator 212/Tillotson 212. Does not require insulator plate. Includes Pulse fitting for Fuel pump. Typically requires a 100 Main Jet for std bore Gas GX390 carbs and 102 or 105 for Gas Bored Carbs... MSRP: $48.38 Now: $42.99 Add to Cart Compare Quick view Mikuni | sku: NR_28MM-MIKUNI-ALKY-CARB Mikuni 28MM Flatslide Carb, Methanol Genuine Mikuni 28MM Flatslide carburetor prepared for use with methanol/alcohol This is the carb only. MSRP: Now: $159.99 View Details Compare Quick view Mikuni | sku: K_OMBMCB Mikuni Throttle Bracket Predator 212 Ghost GX200 Clone Finally, there is a way to use a vintage throttle and a Mikuni carb! This bracket bolts to the side cover of most 6.5HP OHV engines, such as the Predator 212, GX200, and Clones. Perfect for minibikes and go karts. Once bolted to the side cover you can... MSRP: $19.99 Now: $19.95 Add to Cart Compare Quick view Mikuni | sku: TI_472INT Intake Manifold 28mm Slide/Spigot to 196cc Clone Honda GX200 Predator 212 Intake Manifold 28mm Slide/Spigot to 196cc Clone, Honda GX200, Predator 212 engines Designed and CNC machined to match each unique intake port shape precisely at the entrance of the block or cylinder head. The resulting action is no turbulence causing... MSRP: Now: $41.99 View Details Compare Quick view sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 Cone Air Filter, Race, 3" x 2.25" Inside diameter is 39mmStainless Steel CapFits 22mm Small Body Mikuni carbs. Color may vary. Carb not included Like all guaze type filters, this filter needs to be oiled for maximum filtration! MSRP: Now: $10.99 View Details Compare Quick view Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour Mikuni DF52 Pulse Style Fuel Pump. This fuel pump operates from a vacuum pulse from either the engine's crankcase or intake manifold. Methanol or Gas. 35 lt/hr Single or Dual outlet Use for high volume small and big block methanol applications MSRP: Now: $35.99 View Details Compare Quick view sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable Throttle Cable for Mikuni Carbs, With Sleeve, 39" Sleeve Length: 39 inchesOverall Length: 44 inches90° Angle Mount Has Curved end with Barrel for attaching to twist Throttles MSRP: Now: $17.99 Add to Cart Compare Quick view Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor Mikuni TM 24mm Flat Slide Carburetor. Special order only. May take up to 10 days to ship. MSRP: Now: $127.99 View Details Compare Quick view Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) This is a genuine VM22 Mikuni Carb, not a Chinese copy. This is a flange mount carb. MSRP: Now: $104.10 View Details Compare Quick view sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200 and Predator 212. The tube end has a 1.25" OD and 1.135" ID for use with many tube mount carbs. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $41.99 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 MSRP: Now: $10.99 View Details Compare Quick view Details Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour MSRP: Now: $35.99 View Details Compare SPECIAL ORDER Quick view Details sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable MSRP: Now: $17.99 Add to Cart Compare Quick view Details Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor MSRP: Now: $127.99 View Details Compare Quick view Details Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) MSRP: Now: $104.10 View Details Compare Quick view Details sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 MSRP: Now: $41.99 Add to Cart Compare Quick view Mikuni | sku: VMC_ZN8650-CB302-140 40" Throttle Cable Mikuni End 40" total length cable with barrel and slide carb ends MSRP: Now: $14.95 Add to Cart Compare Quick view Mikuni | sku: NR_MAN-LG-PULSE Intake Manifold Mikuni 22MM GX200 Predator 212 Long Style with Pulse Intake Manifold, Mikuni 22mm carbs to GX200/Predator 212, 196cc Clone/Tillotson 212. Also adapts GX390 and most flanged carbs. With pulse fitting to run fuel pumps. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $51.99 Add to Cart Compare Quick view Predator | sku: NR_QMNRR-12 Intake Manifold GX390 Carb to GX200 Predator 212 Long Style Intake Manifold, GX390 Carb to GX200/196cc Clone, Predator 212/Tillotson 212. Does not require insulator plate. Includes Pulse fitting for Fuel pump. Typically requires a 100 Main Jet for std bore Gas GX390 carbs and 102 or 105 for Gas Bored Carbs... MSRP: $48.38 Now: $42.99 Add to Cart Compare Quick view Mikuni | sku: NR_28MM-MIKUNI-ALKY-CARB Mikuni 28MM Flatslide Carb, Methanol Genuine Mikuni 28MM Flatslide carburetor prepared for use with methanol/alcohol This is the carb only. MSRP: Now: $159.99 View Details Compare Quick view Mikuni | sku: K_OMBMCB Mikuni Throttle Bracket Predator 212 Ghost GX200 Clone Finally, there is a way to use a vintage throttle and a Mikuni carb! This bracket bolts to the side cover of most 6.5HP OHV engines, such as the Predator 212, GX200, and Clones. Perfect for minibikes and go karts. Once bolted to the side cover you can... MSRP: $19.99 Now: $19.95 Add to Cart Compare Quick view Mikuni | sku: TI_472INT Intake Manifold 28mm Slide/Spigot to 196cc Clone Honda GX200 Predator 212 Intake Manifold 28mm Slide/Spigot to 196cc Clone, Honda GX200, Predator 212 engines Designed and CNC machined to match each unique intake port shape precisely at the entrance of the block or cylinder head. The resulting action is no turbulence causing... MSRP: Now: $41.99 View Details Compare Quick view sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 Cone Air Filter, Race, 3" x 2.25" Inside diameter is 39mmStainless Steel CapFits 22mm Small Body Mikuni carbs. Color may vary. Carb not included Like all guaze type filters, this filter needs to be oiled for maximum filtration! MSRP: Now: $10.99 View Details Compare Quick view Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour Mikuni DF52 Pulse Style Fuel Pump. This fuel pump operates from a vacuum pulse from either the engine's crankcase or intake manifold. Methanol or Gas. 35 lt/hr Single or Dual outlet Use for high volume small and big block methanol applications MSRP: Now: $35.99 View Details Compare Quick view sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable Throttle Cable for Mikuni Carbs, With Sleeve, 39" Sleeve Length: 39 inchesOverall Length: 44 inches90° Angle Mount Has Curved end with Barrel for attaching to twist Throttles MSRP: Now: $17.99 Add to Cart Compare Quick view Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor Mikuni TM 24mm Flat Slide Carburetor. Special order only. May take up to 10 days to ship. MSRP: Now: $127.99 View Details Compare Quick view Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) This is a genuine VM22 Mikuni Carb, not a Chinese copy. This is a flange mount carb. MSRP: Now: $104.10 View Details Compare Quick view sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200 and Predator 212. The tube end has a 1.25" OD and 1.135" ID for use with many tube mount carbs. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $41.99 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour MSRP: Now: $35.99 View Details Compare SPECIAL ORDER Quick view Details sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable MSRP: Now: $17.99 Add to Cart Compare Quick view Details Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor MSRP: Now: $127.99 View Details Compare Quick view Details Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) MSRP: Now: $104.10 View Details Compare Quick view Details sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 MSRP: Now: $41.99 Add to Cart Compare Quick view Mikuni | sku: VMC_ZN8650-CB302-140 40" Throttle Cable Mikuni End 40" total length cable with barrel and slide carb ends MSRP: Now: $14.95 Add to Cart Compare Quick view Mikuni | sku: NR_MAN-LG-PULSE Intake Manifold Mikuni 22MM GX200 Predator 212 Long Style with Pulse Intake Manifold, Mikuni 22mm carbs to GX200/Predator 212, 196cc Clone/Tillotson 212. Also adapts GX390 and most flanged carbs. With pulse fitting to run fuel pumps. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $51.99 Add to Cart Compare Quick view Predator | sku: NR_QMNRR-12 Intake Manifold GX390 Carb to GX200 Predator 212 Long Style Intake Manifold, GX390 Carb to GX200/196cc Clone, Predator 212/Tillotson 212. Does not require insulator plate. Includes Pulse fitting for Fuel pump. Typically requires a 100 Main Jet for std bore Gas GX390 carbs and 102 or 105 for Gas Bored Carbs... MSRP: $48.38 Now: $42.99 Add to Cart Compare Quick view Mikuni | sku: NR_28MM-MIKUNI-ALKY-CARB Mikuni 28MM Flatslide Carb, Methanol Genuine Mikuni 28MM Flatslide carburetor prepared for use with methanol/alcohol This is the carb only. MSRP: Now: $159.99 View Details Compare Quick view Mikuni | sku: K_OMBMCB Mikuni Throttle Bracket Predator 212 Ghost GX200 Clone Finally, there is a way to use a vintage throttle and a Mikuni carb! This bracket bolts to the side cover of most 6.5HP OHV engines, such as the Predator 212, GX200, and Clones. Perfect for minibikes and go karts. Once bolted to the side cover you can... MSRP: $19.99 Now: $19.95 Add to Cart Compare Quick view Mikuni | sku: TI_472INT Intake Manifold 28mm Slide/Spigot to 196cc Clone Honda GX200 Predator 212 Intake Manifold 28mm Slide/Spigot to 196cc Clone, Honda GX200, Predator 212 engines Designed and CNC machined to match each unique intake port shape precisely at the entrance of the block or cylinder head. The resulting action is no turbulence causing... MSRP: Now: $41.99 View Details Compare Quick view sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 Cone Air Filter, Race, 3" x 2.25" Inside diameter is 39mmStainless Steel CapFits 22mm Small Body Mikuni carbs. Color may vary. Carb not included Like all guaze type filters, this filter needs to be oiled for maximum filtration! MSRP: Now: $10.99 View Details Compare Quick view Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour Mikuni DF52 Pulse Style Fuel Pump. This fuel pump operates from a vacuum pulse from either the engine's crankcase or intake manifold. Methanol or Gas. 35 lt/hr Single or Dual outlet Use for high volume small and big block methanol applications MSRP: Now: $35.99 View Details Compare Quick view sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable Throttle Cable for Mikuni Carbs, With Sleeve, 39" Sleeve Length: 39 inchesOverall Length: 44 inches90° Angle Mount Has Curved end with Barrel for attaching to twist Throttles MSRP: Now: $17.99 Add to Cart Compare Quick view Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor Mikuni TM 24mm Flat Slide Carburetor. Special order only. May take up to 10 days to ship. MSRP: Now: $127.99 View Details Compare Quick view Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) This is a genuine VM22 Mikuni Carb, not a Chinese copy. This is a flange mount carb. MSRP: Now: $104.10 View Details Compare Quick view sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200 and Predator 212. The tube end has a 1.25" OD and 1.135" ID for use with many tube mount carbs. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $41.99 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
SPECIAL ORDER Quick view Details sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable MSRP: Now: $17.99 Add to Cart Compare Quick view Details Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor MSRP: Now: $127.99 View Details Compare Quick view Details Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) MSRP: Now: $104.10 View Details Compare Quick view Details sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 MSRP: Now: $41.99 Add to Cart Compare Quick view Mikuni | sku: VMC_ZN8650-CB302-140 40" Throttle Cable Mikuni End 40" total length cable with barrel and slide carb ends MSRP: Now: $14.95 Add to Cart Compare Quick view Mikuni | sku: NR_MAN-LG-PULSE Intake Manifold Mikuni 22MM GX200 Predator 212 Long Style with Pulse Intake Manifold, Mikuni 22mm carbs to GX200/Predator 212, 196cc Clone/Tillotson 212. Also adapts GX390 and most flanged carbs. With pulse fitting to run fuel pumps. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $51.99 Add to Cart Compare Quick view Predator | sku: NR_QMNRR-12 Intake Manifold GX390 Carb to GX200 Predator 212 Long Style Intake Manifold, GX390 Carb to GX200/196cc Clone, Predator 212/Tillotson 212. Does not require insulator plate. Includes Pulse fitting for Fuel pump. Typically requires a 100 Main Jet for std bore Gas GX390 carbs and 102 or 105 for Gas Bored Carbs... MSRP: $48.38 Now: $42.99 Add to Cart Compare Quick view Mikuni | sku: NR_28MM-MIKUNI-ALKY-CARB Mikuni 28MM Flatslide Carb, Methanol Genuine Mikuni 28MM Flatslide carburetor prepared for use with methanol/alcohol This is the carb only. MSRP: Now: $159.99 View Details Compare Quick view Mikuni | sku: K_OMBMCB Mikuni Throttle Bracket Predator 212 Ghost GX200 Clone Finally, there is a way to use a vintage throttle and a Mikuni carb! This bracket bolts to the side cover of most 6.5HP OHV engines, such as the Predator 212, GX200, and Clones. Perfect for minibikes and go karts. Once bolted to the side cover you can... MSRP: $19.99 Now: $19.95 Add to Cart Compare Quick view Mikuni | sku: TI_472INT Intake Manifold 28mm Slide/Spigot to 196cc Clone Honda GX200 Predator 212 Intake Manifold 28mm Slide/Spigot to 196cc Clone, Honda GX200, Predator 212 engines Designed and CNC machined to match each unique intake port shape precisely at the entrance of the block or cylinder head. The resulting action is no turbulence causing... MSRP: Now: $41.99 View Details Compare Quick view sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 Cone Air Filter, Race, 3" x 2.25" Inside diameter is 39mmStainless Steel CapFits 22mm Small Body Mikuni carbs. Color may vary. Carb not included Like all guaze type filters, this filter needs to be oiled for maximum filtration! MSRP: Now: $10.99 View Details Compare Quick view Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour Mikuni DF52 Pulse Style Fuel Pump. This fuel pump operates from a vacuum pulse from either the engine's crankcase or intake manifold. Methanol or Gas. 35 lt/hr Single or Dual outlet Use for high volume small and big block methanol applications MSRP: Now: $35.99 View Details Compare Quick view sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable Throttle Cable for Mikuni Carbs, With Sleeve, 39" Sleeve Length: 39 inchesOverall Length: 44 inches90° Angle Mount Has Curved end with Barrel for attaching to twist Throttles MSRP: Now: $17.99 Add to Cart Compare Quick view Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor Mikuni TM 24mm Flat Slide Carburetor. Special order only. May take up to 10 days to ship. MSRP: Now: $127.99 View Details Compare Quick view Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) This is a genuine VM22 Mikuni Carb, not a Chinese copy. This is a flange mount carb. MSRP: Now: $104.10 View Details Compare Quick view sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200 and Predator 212. The tube end has a 1.25" OD and 1.135" ID for use with many tube mount carbs. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $41.99 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor MSRP: Now: $127.99 View Details Compare Quick view Details Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) MSRP: Now: $104.10 View Details Compare Quick view Details sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 MSRP: Now: $41.99 Add to Cart Compare Quick view Mikuni | sku: VMC_ZN8650-CB302-140 40" Throttle Cable Mikuni End 40" total length cable with barrel and slide carb ends MSRP: Now: $14.95 Add to Cart Compare Quick view Mikuni | sku: NR_MAN-LG-PULSE Intake Manifold Mikuni 22MM GX200 Predator 212 Long Style with Pulse Intake Manifold, Mikuni 22mm carbs to GX200/Predator 212, 196cc Clone/Tillotson 212. Also adapts GX390 and most flanged carbs. With pulse fitting to run fuel pumps. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $51.99 Add to Cart Compare Quick view Predator | sku: NR_QMNRR-12 Intake Manifold GX390 Carb to GX200 Predator 212 Long Style Intake Manifold, GX390 Carb to GX200/196cc Clone, Predator 212/Tillotson 212. Does not require insulator plate. Includes Pulse fitting for Fuel pump. Typically requires a 100 Main Jet for std bore Gas GX390 carbs and 102 or 105 for Gas Bored Carbs... MSRP: $48.38 Now: $42.99 Add to Cart Compare Quick view Mikuni | sku: NR_28MM-MIKUNI-ALKY-CARB Mikuni 28MM Flatslide Carb, Methanol Genuine Mikuni 28MM Flatslide carburetor prepared for use with methanol/alcohol This is the carb only. MSRP: Now: $159.99 View Details Compare Quick view Mikuni | sku: K_OMBMCB Mikuni Throttle Bracket Predator 212 Ghost GX200 Clone Finally, there is a way to use a vintage throttle and a Mikuni carb! This bracket bolts to the side cover of most 6.5HP OHV engines, such as the Predator 212, GX200, and Clones. Perfect for minibikes and go karts. Once bolted to the side cover you can... MSRP: $19.99 Now: $19.95 Add to Cart Compare Quick view Mikuni | sku: TI_472INT Intake Manifold 28mm Slide/Spigot to 196cc Clone Honda GX200 Predator 212 Intake Manifold 28mm Slide/Spigot to 196cc Clone, Honda GX200, Predator 212 engines Designed and CNC machined to match each unique intake port shape precisely at the entrance of the block or cylinder head. The resulting action is no turbulence causing... MSRP: Now: $41.99 View Details Compare Quick view sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 Cone Air Filter, Race, 3" x 2.25" Inside diameter is 39mmStainless Steel CapFits 22mm Small Body Mikuni carbs. Color may vary. Carb not included Like all guaze type filters, this filter needs to be oiled for maximum filtration! MSRP: Now: $10.99 View Details Compare Quick view Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour Mikuni DF52 Pulse Style Fuel Pump. This fuel pump operates from a vacuum pulse from either the engine's crankcase or intake manifold. Methanol or Gas. 35 lt/hr Single or Dual outlet Use for high volume small and big block methanol applications MSRP: Now: $35.99 View Details Compare Quick view sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable Throttle Cable for Mikuni Carbs, With Sleeve, 39" Sleeve Length: 39 inchesOverall Length: 44 inches90° Angle Mount Has Curved end with Barrel for attaching to twist Throttles MSRP: Now: $17.99 Add to Cart Compare Quick view Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor Mikuni TM 24mm Flat Slide Carburetor. Special order only. May take up to 10 days to ship. MSRP: Now: $127.99 View Details Compare Quick view Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) This is a genuine VM22 Mikuni Carb, not a Chinese copy. This is a flange mount carb. MSRP: Now: $104.10 View Details Compare Quick view sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200 and Predator 212. The tube end has a 1.25" OD and 1.135" ID for use with many tube mount carbs. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $41.99 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) MSRP: Now: $104.10 View Details Compare Quick view Details sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 MSRP: Now: $41.99 Add to Cart Compare Quick view Mikuni | sku: VMC_ZN8650-CB302-140 40" Throttle Cable Mikuni End 40" total length cable with barrel and slide carb ends MSRP: Now: $14.95 Add to Cart Compare Quick view Mikuni | sku: NR_MAN-LG-PULSE Intake Manifold Mikuni 22MM GX200 Predator 212 Long Style with Pulse Intake Manifold, Mikuni 22mm carbs to GX200/Predator 212, 196cc Clone/Tillotson 212. Also adapts GX390 and most flanged carbs. With pulse fitting to run fuel pumps. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $51.99 Add to Cart Compare Quick view Predator | sku: NR_QMNRR-12 Intake Manifold GX390 Carb to GX200 Predator 212 Long Style Intake Manifold, GX390 Carb to GX200/196cc Clone, Predator 212/Tillotson 212. Does not require insulator plate. Includes Pulse fitting for Fuel pump. Typically requires a 100 Main Jet for std bore Gas GX390 carbs and 102 or 105 for Gas Bored Carbs... MSRP: $48.38 Now: $42.99 Add to Cart Compare Quick view Mikuni | sku: NR_28MM-MIKUNI-ALKY-CARB Mikuni 28MM Flatslide Carb, Methanol Genuine Mikuni 28MM Flatslide carburetor prepared for use with methanol/alcohol This is the carb only. MSRP: Now: $159.99 View Details Compare Quick view Mikuni | sku: K_OMBMCB Mikuni Throttle Bracket Predator 212 Ghost GX200 Clone Finally, there is a way to use a vintage throttle and a Mikuni carb! This bracket bolts to the side cover of most 6.5HP OHV engines, such as the Predator 212, GX200, and Clones. Perfect for minibikes and go karts. Once bolted to the side cover you can... MSRP: $19.99 Now: $19.95 Add to Cart Compare Quick view Mikuni | sku: TI_472INT Intake Manifold 28mm Slide/Spigot to 196cc Clone Honda GX200 Predator 212 Intake Manifold 28mm Slide/Spigot to 196cc Clone, Honda GX200, Predator 212 engines Designed and CNC machined to match each unique intake port shape precisely at the entrance of the block or cylinder head. The resulting action is no turbulence causing... MSRP: Now: $41.99 View Details Compare Quick view sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 Cone Air Filter, Race, 3" x 2.25" Inside diameter is 39mmStainless Steel CapFits 22mm Small Body Mikuni carbs. Color may vary. Carb not included Like all guaze type filters, this filter needs to be oiled for maximum filtration! MSRP: Now: $10.99 View Details Compare Quick view Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour Mikuni DF52 Pulse Style Fuel Pump. This fuel pump operates from a vacuum pulse from either the engine's crankcase or intake manifold. Methanol or Gas. 35 lt/hr Single or Dual outlet Use for high volume small and big block methanol applications MSRP: Now: $35.99 View Details Compare Quick view sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable Throttle Cable for Mikuni Carbs, With Sleeve, 39" Sleeve Length: 39 inchesOverall Length: 44 inches90° Angle Mount Has Curved end with Barrel for attaching to twist Throttles MSRP: Now: $17.99 Add to Cart Compare Quick view Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor Mikuni TM 24mm Flat Slide Carburetor. Special order only. May take up to 10 days to ship. MSRP: Now: $127.99 View Details Compare Quick view Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) This is a genuine VM22 Mikuni Carb, not a Chinese copy. This is a flange mount carb. MSRP: Now: $104.10 View Details Compare Quick view sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200 and Predator 212. The tube end has a 1.25" OD and 1.135" ID for use with many tube mount carbs. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $41.99 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Details sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 MSRP: Now: $41.99 Add to Cart Compare Quick view Mikuni | sku: VMC_ZN8650-CB302-140 40" Throttle Cable Mikuni End 40" total length cable with barrel and slide carb ends MSRP: Now: $14.95 Add to Cart Compare Quick view Mikuni | sku: NR_MAN-LG-PULSE Intake Manifold Mikuni 22MM GX200 Predator 212 Long Style with Pulse Intake Manifold, Mikuni 22mm carbs to GX200/Predator 212, 196cc Clone/Tillotson 212. Also adapts GX390 and most flanged carbs. With pulse fitting to run fuel pumps. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $51.99 Add to Cart Compare Quick view Predator | sku: NR_QMNRR-12 Intake Manifold GX390 Carb to GX200 Predator 212 Long Style Intake Manifold, GX390 Carb to GX200/196cc Clone, Predator 212/Tillotson 212. Does not require insulator plate. Includes Pulse fitting for Fuel pump. Typically requires a 100 Main Jet for std bore Gas GX390 carbs and 102 or 105 for Gas Bored Carbs... MSRP: $48.38 Now: $42.99 Add to Cart Compare Quick view Mikuni | sku: NR_28MM-MIKUNI-ALKY-CARB Mikuni 28MM Flatslide Carb, Methanol Genuine Mikuni 28MM Flatslide carburetor prepared for use with methanol/alcohol This is the carb only. MSRP: Now: $159.99 View Details Compare Quick view Mikuni | sku: K_OMBMCB Mikuni Throttle Bracket Predator 212 Ghost GX200 Clone Finally, there is a way to use a vintage throttle and a Mikuni carb! This bracket bolts to the side cover of most 6.5HP OHV engines, such as the Predator 212, GX200, and Clones. Perfect for minibikes and go karts. Once bolted to the side cover you can... MSRP: $19.99 Now: $19.95 Add to Cart Compare Quick view Mikuni | sku: TI_472INT Intake Manifold 28mm Slide/Spigot to 196cc Clone Honda GX200 Predator 212 Intake Manifold 28mm Slide/Spigot to 196cc Clone, Honda GX200, Predator 212 engines Designed and CNC machined to match each unique intake port shape precisely at the entrance of the block or cylinder head. The resulting action is no turbulence causing... MSRP: Now: $41.99 View Details Compare Quick view sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 Cone Air Filter, Race, 3" x 2.25" Inside diameter is 39mmStainless Steel CapFits 22mm Small Body Mikuni carbs. Color may vary. Carb not included Like all guaze type filters, this filter needs to be oiled for maximum filtration! MSRP: Now: $10.99 View Details Compare Quick view Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour Mikuni DF52 Pulse Style Fuel Pump. This fuel pump operates from a vacuum pulse from either the engine's crankcase or intake manifold. Methanol or Gas. 35 lt/hr Single or Dual outlet Use for high volume small and big block methanol applications MSRP: Now: $35.99 View Details Compare Quick view sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable Throttle Cable for Mikuni Carbs, With Sleeve, 39" Sleeve Length: 39 inchesOverall Length: 44 inches90° Angle Mount Has Curved end with Barrel for attaching to twist Throttles MSRP: Now: $17.99 Add to Cart Compare Quick view Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor Mikuni TM 24mm Flat Slide Carburetor. Special order only. May take up to 10 days to ship. MSRP: Now: $127.99 View Details Compare Quick view Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) This is a genuine VM22 Mikuni Carb, not a Chinese copy. This is a flange mount carb. MSRP: Now: $104.10 View Details Compare Quick view sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200 and Predator 212. The tube end has a 1.25" OD and 1.135" ID for use with many tube mount carbs. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $41.99 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Mikuni | sku: VMC_ZN8650-CB302-140 40" Throttle Cable Mikuni End 40" total length cable with barrel and slide carb ends MSRP: Now: $14.95 Add to Cart Compare Quick view Mikuni | sku: NR_MAN-LG-PULSE Intake Manifold Mikuni 22MM GX200 Predator 212 Long Style with Pulse Intake Manifold, Mikuni 22mm carbs to GX200/Predator 212, 196cc Clone/Tillotson 212. Also adapts GX390 and most flanged carbs. With pulse fitting to run fuel pumps. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $51.99 Add to Cart Compare Quick view Predator | sku: NR_QMNRR-12 Intake Manifold GX390 Carb to GX200 Predator 212 Long Style Intake Manifold, GX390 Carb to GX200/196cc Clone, Predator 212/Tillotson 212. Does not require insulator plate. Includes Pulse fitting for Fuel pump. Typically requires a 100 Main Jet for std bore Gas GX390 carbs and 102 or 105 for Gas Bored Carbs... MSRP: $48.38 Now: $42.99 Add to Cart Compare Quick view Mikuni | sku: NR_28MM-MIKUNI-ALKY-CARB Mikuni 28MM Flatslide Carb, Methanol Genuine Mikuni 28MM Flatslide carburetor prepared for use with methanol/alcohol This is the carb only. MSRP: Now: $159.99 View Details Compare Quick view Mikuni | sku: K_OMBMCB Mikuni Throttle Bracket Predator 212 Ghost GX200 Clone Finally, there is a way to use a vintage throttle and a Mikuni carb! This bracket bolts to the side cover of most 6.5HP OHV engines, such as the Predator 212, GX200, and Clones. Perfect for minibikes and go karts. Once bolted to the side cover you can... MSRP: $19.99 Now: $19.95 Add to Cart Compare Quick view Mikuni | sku: TI_472INT Intake Manifold 28mm Slide/Spigot to 196cc Clone Honda GX200 Predator 212 Intake Manifold 28mm Slide/Spigot to 196cc Clone, Honda GX200, Predator 212 engines Designed and CNC machined to match each unique intake port shape precisely at the entrance of the block or cylinder head. The resulting action is no turbulence causing... MSRP: Now: $41.99 View Details Compare Quick view sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 Cone Air Filter, Race, 3" x 2.25" Inside diameter is 39mmStainless Steel CapFits 22mm Small Body Mikuni carbs. Color may vary. Carb not included Like all guaze type filters, this filter needs to be oiled for maximum filtration! MSRP: Now: $10.99 View Details Compare Quick view Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour Mikuni DF52 Pulse Style Fuel Pump. This fuel pump operates from a vacuum pulse from either the engine's crankcase or intake manifold. Methanol or Gas. 35 lt/hr Single or Dual outlet Use for high volume small and big block methanol applications MSRP: Now: $35.99 View Details Compare Quick view sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable Throttle Cable for Mikuni Carbs, With Sleeve, 39" Sleeve Length: 39 inchesOverall Length: 44 inches90° Angle Mount Has Curved end with Barrel for attaching to twist Throttles MSRP: Now: $17.99 Add to Cart Compare Quick view Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor Mikuni TM 24mm Flat Slide Carburetor. Special order only. May take up to 10 days to ship. MSRP: Now: $127.99 View Details Compare Quick view Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) This is a genuine VM22 Mikuni Carb, not a Chinese copy. This is a flange mount carb. MSRP: Now: $104.10 View Details Compare Quick view sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200 and Predator 212. The tube end has a 1.25" OD and 1.135" ID for use with many tube mount carbs. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $41.99 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Mikuni | sku: NR_MAN-LG-PULSE Intake Manifold Mikuni 22MM GX200 Predator 212 Long Style with Pulse Intake Manifold, Mikuni 22mm carbs to GX200/Predator 212, 196cc Clone/Tillotson 212. Also adapts GX390 and most flanged carbs. With pulse fitting to run fuel pumps. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $51.99 Add to Cart Compare Quick view Predator | sku: NR_QMNRR-12 Intake Manifold GX390 Carb to GX200 Predator 212 Long Style Intake Manifold, GX390 Carb to GX200/196cc Clone, Predator 212/Tillotson 212. Does not require insulator plate. Includes Pulse fitting for Fuel pump. Typically requires a 100 Main Jet for std bore Gas GX390 carbs and 102 or 105 for Gas Bored Carbs... MSRP: $48.38 Now: $42.99 Add to Cart Compare Quick view Mikuni | sku: NR_28MM-MIKUNI-ALKY-CARB Mikuni 28MM Flatslide Carb, Methanol Genuine Mikuni 28MM Flatslide carburetor prepared for use with methanol/alcohol This is the carb only. MSRP: Now: $159.99 View Details Compare Quick view Mikuni | sku: K_OMBMCB Mikuni Throttle Bracket Predator 212 Ghost GX200 Clone Finally, there is a way to use a vintage throttle and a Mikuni carb! This bracket bolts to the side cover of most 6.5HP OHV engines, such as the Predator 212, GX200, and Clones. Perfect for minibikes and go karts. Once bolted to the side cover you can... MSRP: $19.99 Now: $19.95 Add to Cart Compare Quick view Mikuni | sku: TI_472INT Intake Manifold 28mm Slide/Spigot to 196cc Clone Honda GX200 Predator 212 Intake Manifold 28mm Slide/Spigot to 196cc Clone, Honda GX200, Predator 212 engines Designed and CNC machined to match each unique intake port shape precisely at the entrance of the block or cylinder head. The resulting action is no turbulence causing... MSRP: Now: $41.99 View Details Compare Quick view sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 Cone Air Filter, Race, 3" x 2.25" Inside diameter is 39mmStainless Steel CapFits 22mm Small Body Mikuni carbs. Color may vary. Carb not included Like all guaze type filters, this filter needs to be oiled for maximum filtration! MSRP: Now: $10.99 View Details Compare Quick view Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour Mikuni DF52 Pulse Style Fuel Pump. This fuel pump operates from a vacuum pulse from either the engine's crankcase or intake manifold. Methanol or Gas. 35 lt/hr Single or Dual outlet Use for high volume small and big block methanol applications MSRP: Now: $35.99 View Details Compare Quick view sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable Throttle Cable for Mikuni Carbs, With Sleeve, 39" Sleeve Length: 39 inchesOverall Length: 44 inches90° Angle Mount Has Curved end with Barrel for attaching to twist Throttles MSRP: Now: $17.99 Add to Cart Compare Quick view Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor Mikuni TM 24mm Flat Slide Carburetor. Special order only. May take up to 10 days to ship. MSRP: Now: $127.99 View Details Compare Quick view Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) This is a genuine VM22 Mikuni Carb, not a Chinese copy. This is a flange mount carb. MSRP: Now: $104.10 View Details Compare Quick view sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200 and Predator 212. The tube end has a 1.25" OD and 1.135" ID for use with many tube mount carbs. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $41.99 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Predator | sku: NR_QMNRR-12 Intake Manifold GX390 Carb to GX200 Predator 212 Long Style Intake Manifold, GX390 Carb to GX200/196cc Clone, Predator 212/Tillotson 212. Does not require insulator plate. Includes Pulse fitting for Fuel pump. Typically requires a 100 Main Jet for std bore Gas GX390 carbs and 102 or 105 for Gas Bored Carbs... MSRP: $48.38 Now: $42.99 Add to Cart Compare Quick view Mikuni | sku: NR_28MM-MIKUNI-ALKY-CARB Mikuni 28MM Flatslide Carb, Methanol Genuine Mikuni 28MM Flatslide carburetor prepared for use with methanol/alcohol This is the carb only. MSRP: Now: $159.99 View Details Compare Quick view Mikuni | sku: K_OMBMCB Mikuni Throttle Bracket Predator 212 Ghost GX200 Clone Finally, there is a way to use a vintage throttle and a Mikuni carb! This bracket bolts to the side cover of most 6.5HP OHV engines, such as the Predator 212, GX200, and Clones. Perfect for minibikes and go karts. Once bolted to the side cover you can... MSRP: $19.99 Now: $19.95 Add to Cart Compare Quick view Mikuni | sku: TI_472INT Intake Manifold 28mm Slide/Spigot to 196cc Clone Honda GX200 Predator 212 Intake Manifold 28mm Slide/Spigot to 196cc Clone, Honda GX200, Predator 212 engines Designed and CNC machined to match each unique intake port shape precisely at the entrance of the block or cylinder head. The resulting action is no turbulence causing... MSRP: Now: $41.99 View Details Compare Quick view sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 Cone Air Filter, Race, 3" x 2.25" Inside diameter is 39mmStainless Steel CapFits 22mm Small Body Mikuni carbs. Color may vary. Carb not included Like all guaze type filters, this filter needs to be oiled for maximum filtration! MSRP: Now: $10.99 View Details Compare Quick view Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour Mikuni DF52 Pulse Style Fuel Pump. This fuel pump operates from a vacuum pulse from either the engine's crankcase or intake manifold. Methanol or Gas. 35 lt/hr Single or Dual outlet Use for high volume small and big block methanol applications MSRP: Now: $35.99 View Details Compare Quick view sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable Throttle Cable for Mikuni Carbs, With Sleeve, 39" Sleeve Length: 39 inchesOverall Length: 44 inches90° Angle Mount Has Curved end with Barrel for attaching to twist Throttles MSRP: Now: $17.99 Add to Cart Compare Quick view Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor Mikuni TM 24mm Flat Slide Carburetor. Special order only. May take up to 10 days to ship. MSRP: Now: $127.99 View Details Compare Quick view Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) This is a genuine VM22 Mikuni Carb, not a Chinese copy. This is a flange mount carb. MSRP: Now: $104.10 View Details Compare Quick view sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200 and Predator 212. The tube end has a 1.25" OD and 1.135" ID for use with many tube mount carbs. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $41.99 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Mikuni | sku: NR_28MM-MIKUNI-ALKY-CARB Mikuni 28MM Flatslide Carb, Methanol Genuine Mikuni 28MM Flatslide carburetor prepared for use with methanol/alcohol This is the carb only. MSRP: Now: $159.99 View Details Compare Quick view Mikuni | sku: K_OMBMCB Mikuni Throttle Bracket Predator 212 Ghost GX200 Clone Finally, there is a way to use a vintage throttle and a Mikuni carb! This bracket bolts to the side cover of most 6.5HP OHV engines, such as the Predator 212, GX200, and Clones. Perfect for minibikes and go karts. Once bolted to the side cover you can... MSRP: $19.99 Now: $19.95 Add to Cart Compare Quick view Mikuni | sku: TI_472INT Intake Manifold 28mm Slide/Spigot to 196cc Clone Honda GX200 Predator 212 Intake Manifold 28mm Slide/Spigot to 196cc Clone, Honda GX200, Predator 212 engines Designed and CNC machined to match each unique intake port shape precisely at the entrance of the block or cylinder head. The resulting action is no turbulence causing... MSRP: Now: $41.99 View Details Compare Quick view sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 Cone Air Filter, Race, 3" x 2.25" Inside diameter is 39mmStainless Steel CapFits 22mm Small Body Mikuni carbs. Color may vary. Carb not included Like all guaze type filters, this filter needs to be oiled for maximum filtration! MSRP: Now: $10.99 View Details Compare Quick view Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour Mikuni DF52 Pulse Style Fuel Pump. This fuel pump operates from a vacuum pulse from either the engine's crankcase or intake manifold. Methanol or Gas. 35 lt/hr Single or Dual outlet Use for high volume small and big block methanol applications MSRP: Now: $35.99 View Details Compare Quick view sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable Throttle Cable for Mikuni Carbs, With Sleeve, 39" Sleeve Length: 39 inchesOverall Length: 44 inches90° Angle Mount Has Curved end with Barrel for attaching to twist Throttles MSRP: Now: $17.99 Add to Cart Compare Quick view Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor Mikuni TM 24mm Flat Slide Carburetor. Special order only. May take up to 10 days to ship. MSRP: Now: $127.99 View Details Compare Quick view Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) This is a genuine VM22 Mikuni Carb, not a Chinese copy. This is a flange mount carb. MSRP: Now: $104.10 View Details Compare Quick view sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200 and Predator 212. The tube end has a 1.25" OD and 1.135" ID for use with many tube mount carbs. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $41.99 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Mikuni | sku: K_OMBMCB Mikuni Throttle Bracket Predator 212 Ghost GX200 Clone Finally, there is a way to use a vintage throttle and a Mikuni carb! This bracket bolts to the side cover of most 6.5HP OHV engines, such as the Predator 212, GX200, and Clones. Perfect for minibikes and go karts. Once bolted to the side cover you can... MSRP: $19.99 Now: $19.95 Add to Cart Compare Quick view Mikuni | sku: TI_472INT Intake Manifold 28mm Slide/Spigot to 196cc Clone Honda GX200 Predator 212 Intake Manifold 28mm Slide/Spigot to 196cc Clone, Honda GX200, Predator 212 engines Designed and CNC machined to match each unique intake port shape precisely at the entrance of the block or cylinder head. The resulting action is no turbulence causing... MSRP: Now: $41.99 View Details Compare Quick view sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 Cone Air Filter, Race, 3" x 2.25" Inside diameter is 39mmStainless Steel CapFits 22mm Small Body Mikuni carbs. Color may vary. Carb not included Like all guaze type filters, this filter needs to be oiled for maximum filtration! MSRP: Now: $10.99 View Details Compare Quick view Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour Mikuni DF52 Pulse Style Fuel Pump. This fuel pump operates from a vacuum pulse from either the engine's crankcase or intake manifold. Methanol or Gas. 35 lt/hr Single or Dual outlet Use for high volume small and big block methanol applications MSRP: Now: $35.99 View Details Compare Quick view sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable Throttle Cable for Mikuni Carbs, With Sleeve, 39" Sleeve Length: 39 inchesOverall Length: 44 inches90° Angle Mount Has Curved end with Barrel for attaching to twist Throttles MSRP: Now: $17.99 Add to Cart Compare Quick view Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor Mikuni TM 24mm Flat Slide Carburetor. Special order only. May take up to 10 days to ship. MSRP: Now: $127.99 View Details Compare Quick view Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) This is a genuine VM22 Mikuni Carb, not a Chinese copy. This is a flange mount carb. MSRP: Now: $104.10 View Details Compare Quick view sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200 and Predator 212. The tube end has a 1.25" OD and 1.135" ID for use with many tube mount carbs. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $41.99 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Mikuni | sku: TI_472INT Intake Manifold 28mm Slide/Spigot to 196cc Clone Honda GX200 Predator 212 Intake Manifold 28mm Slide/Spigot to 196cc Clone, Honda GX200, Predator 212 engines Designed and CNC machined to match each unique intake port shape precisely at the entrance of the block or cylinder head. The resulting action is no turbulence causing... MSRP: Now: $41.99 View Details Compare Quick view sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 Cone Air Filter, Race, 3" x 2.25" Inside diameter is 39mmStainless Steel CapFits 22mm Small Body Mikuni carbs. Color may vary. Carb not included Like all guaze type filters, this filter needs to be oiled for maximum filtration! MSRP: Now: $10.99 View Details Compare Quick view Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour Mikuni DF52 Pulse Style Fuel Pump. This fuel pump operates from a vacuum pulse from either the engine's crankcase or intake manifold. Methanol or Gas. 35 lt/hr Single or Dual outlet Use for high volume small and big block methanol applications MSRP: Now: $35.99 View Details Compare Quick view sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable Throttle Cable for Mikuni Carbs, With Sleeve, 39" Sleeve Length: 39 inchesOverall Length: 44 inches90° Angle Mount Has Curved end with Barrel for attaching to twist Throttles MSRP: Now: $17.99 Add to Cart Compare Quick view Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor Mikuni TM 24mm Flat Slide Carburetor. Special order only. May take up to 10 days to ship. MSRP: Now: $127.99 View Details Compare Quick view Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) This is a genuine VM22 Mikuni Carb, not a Chinese copy. This is a flange mount carb. MSRP: Now: $104.10 View Details Compare Quick view sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200 and Predator 212. The tube end has a 1.25" OD and 1.135" ID for use with many tube mount carbs. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $41.99 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view sku: NR_00084 Stainless Cone Air Filter for Small Body Mikuni VM22 Cone Air Filter, Race, 3" x 2.25" Inside diameter is 39mmStainless Steel CapFits 22mm Small Body Mikuni carbs. Color may vary. Carb not included Like all guaze type filters, this filter needs to be oiled for maximum filtration! MSRP: Now: $10.99 View Details Compare Quick view Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour Mikuni DF52 Pulse Style Fuel Pump. This fuel pump operates from a vacuum pulse from either the engine's crankcase or intake manifold. Methanol or Gas. 35 lt/hr Single or Dual outlet Use for high volume small and big block methanol applications MSRP: Now: $35.99 View Details Compare Quick view sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable Throttle Cable for Mikuni Carbs, With Sleeve, 39" Sleeve Length: 39 inchesOverall Length: 44 inches90° Angle Mount Has Curved end with Barrel for attaching to twist Throttles MSRP: Now: $17.99 Add to Cart Compare Quick view Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor Mikuni TM 24mm Flat Slide Carburetor. Special order only. May take up to 10 days to ship. MSRP: Now: $127.99 View Details Compare Quick view Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) This is a genuine VM22 Mikuni Carb, not a Chinese copy. This is a flange mount carb. MSRP: Now: $104.10 View Details Compare Quick view sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200 and Predator 212. The tube end has a 1.25" OD and 1.135" ID for use with many tube mount carbs. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $41.99 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Mikuni | sku: NR_MIK-DF-52-73 Mikuni DF52 High Volume Fuel Pump 35 Liter per Hour Mikuni DF52 Pulse Style Fuel Pump. This fuel pump operates from a vacuum pulse from either the engine's crankcase or intake manifold. Methanol or Gas. 35 lt/hr Single or Dual outlet Use for high volume small and big block methanol applications MSRP: Now: $35.99 View Details Compare Quick view sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable Throttle Cable for Mikuni Carbs, With Sleeve, 39" Sleeve Length: 39 inchesOverall Length: 44 inches90° Angle Mount Has Curved end with Barrel for attaching to twist Throttles MSRP: Now: $17.99 Add to Cart Compare Quick view Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor Mikuni TM 24mm Flat Slide Carburetor. Special order only. May take up to 10 days to ship. MSRP: Now: $127.99 View Details Compare Quick view Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) This is a genuine VM22 Mikuni Carb, not a Chinese copy. This is a flange mount carb. MSRP: Now: $104.10 View Details Compare Quick view sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200 and Predator 212. The tube end has a 1.25" OD and 1.135" ID for use with many tube mount carbs. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $41.99 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view sku: NR_TC-240-6 Mikuni Throttle Cable 39" Conduit, 44" Inner Cable Throttle Cable for Mikuni Carbs, With Sleeve, 39" Sleeve Length: 39 inchesOverall Length: 44 inches90° Angle Mount Has Curved end with Barrel for attaching to twist Throttles MSRP: Now: $17.99 Add to Cart Compare Quick view Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor Mikuni TM 24mm Flat Slide Carburetor. Special order only. May take up to 10 days to ship. MSRP: Now: $127.99 View Details Compare Quick view Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) This is a genuine VM22 Mikuni Carb, not a Chinese copy. This is a flange mount carb. MSRP: Now: $104.10 View Details Compare Quick view sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200 and Predator 212. The tube end has a 1.25" OD and 1.135" ID for use with many tube mount carbs. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $41.99 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Mikuni | sku: NR_13-5041 Mikuni TM 24mm Flat Slide Carburetor Mikuni TM 24mm Flat Slide Carburetor. Special order only. May take up to 10 days to ship. MSRP: Now: $127.99 View Details Compare Quick view Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) This is a genuine VM22 Mikuni Carb, not a Chinese copy. This is a flange mount carb. MSRP: Now: $104.10 View Details Compare Quick view sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200 and Predator 212. The tube end has a 1.25" OD and 1.135" ID for use with many tube mount carbs. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $41.99 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected × OK
Quick view Mikuni | sku: NR_VM22 Genuine Mikuni 22 mm Round Slide Carb, Gas, VM22 (Large Body) This is a genuine VM22 Mikuni Carb, not a Chinese copy. This is a flange mount carb. MSRP: Now: $104.10 View Details Compare Quick view sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200 and Predator 212. The tube end has a 1.25" OD and 1.135" ID for use with many tube mount carbs. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $41.99 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected
Quick view sku: NR_MAN-24-WP Intake Manifold, Mikuni 24/28 mm Flat Slide to GX200 Predator 212 Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200 and Predator 212. The tube end has a 1.25" OD and 1.135" ID for use with many tube mount carbs. May be natural aluminum finish or black anodized depending on availability (usually these... MSRP: Now: $41.99 Add to Cart Compare 1 2 Next 1 2 Next Compare Selected