Other Performance Parts

Tillotson Crankcase Side Cover GX200 Clone Predator 212 Hemi

138190018 Tillotson Clone Crankcase Side Cover GX200 Honda Clone Sidecover or Crankcase Cover. Fits most 196cc 6.5hp clone and Honda Crankcases or Blocks. Does not come with bearings, seals, oil caps or hardware Warning! This may not work with all...

70MM Dished Piston with Rings

70MM dished piston with rings, piston pin, and circlips. Stock type replacement for 212cc engines with .709" wrist pins including Predator 212.

Fuel filter, 90 degree

Breather Adapter GX200 Clone Predator Non-Hemi

Breather Adapter GX200 Clone Predator Non-Hemi

DJ-0215 OHV 212CC 55MM(2.165") Crankshaft

OHV 212CC 55MM (2.165") crank shaft. This crank will give you around .040 more stroke than a standard Honda/Clone crank shaft and uses the Honda/Clone connecting rods and flywheels    

Flywheel Knocker GX200 predator 212 6.5HP Clones

The best way to remove a flywheel. Just remove the nut, screw knocker on to the end of crank and smack with a hammer. No puller needed, eliminates cracked flywheels from pullers.Approx 8" long and weighs 1 lb 6 oz (note: knocker must not be fully...

320 Grit Flex Hone (fine) GX200 Predator 212 196cc Clones

320 grit (fine) cylinder hone for GX200, Predator 212, 196cc Clones and most 6.5HP engines. Great for deglazing cylinder in preparation for new rings.

Flex Hone 240 Grit (Medium) GX200, Predator 212 196cc Clone

240 grit cylinder hone for GX200, Predator 212, 196cc Clones and most 6.5HP engines. Great for deglazing cylinder in preparation for new rings.

Genuine Honda Flywheel 25/50 Watt Charging GX200 196cc Clone

25 BTDC, Genuine Honda, Charging Flywheel 50 Watt System Use with Honda coil 31510-ZE1-711 50 watt Dual Coil or with 31630-ZE1-013 25 Watt Single CoilPicture is for Reference Only actual flywheel may differ from picture to include color of magnet mount...

Genuine Honda Charging Coil 12V/50W GX200 196cc Clone

For 50 Watt system. Requires 3 Pole Charging Flywheel. DC (12V) output GX160s & GX200s Requires Flywheel 31100-ZE1-811 for recoil or 31100-ZE1-821 for electric start.GX120 Require Flywheeland flywheel 31100-ZE0-812 New or new take off depending on...

Replacement Block 2.756 Bore (208cc & 212cc Engines)

New or new takeoff replacement block. For Piston 2.756. Can be bored to 2.815. Side cover not included - Must order separately if needed Bearings and seals not included. This is a Ducar Clone block bored to 2.756, not a Predator Block and uses Honda...

Breather Hose 90 Degree GX200 Clone Predator 212

90 degree breather hose allows for the filter to be mounted in various locations